There are 197 Items in 14 pages; you are on page number 10
|
Fast Wax Tip
Tue, Jan 22, 2008
- By Dan Meyer
Here are a few tips on using HS-0 Extreme White from the experts who have spent years testing it in Minnesota's coldest snow conditions.
|
Fri, Jan 18, 2008
- By Ian Harvey
In extremely cold conditions (snow temperatures below 10F), a great disparity in the gliding performance of skis is often found. gliding performance of skis is often found.
|
Fri, Jan 11, 2008
- By Ian Harvey
We had anticipated warmer temperatures and more moisture in the snow. The MTU trails in Houghton glaze up really easy normally, but today seemed out of the ordinary. The snow was colder then I had expected and also did not glaze like I figured it would.
|
Fast Wax Tip
Tue, Jan 8, 2008
- By Dan Meyer
Most of the top racers today custom grind their skis for peak performance in all conditions. To help you select a pattern, here are some of the popular grinds used by area racers.
|
Video
Mon, Jan 7, 2008
- By Mike Muha
Here's what ALMOST happened at Sunday's klister-fest at the Boyne Highlands 10km Classic race...
|
Fri, Jan 4, 2008
- By Ian Harvey
Despite the extreme high humidity and easily glazing snow that this area is known for, the snow was surprisingly dry. You had to be especially careful this morning regarding kick wax drag and how to apply it, especially as kick was easy to get.
|
Thu, Jan 3, 2008
- By Ian Harvey
When using JetStream Moly and JetStream High Speed, which are successful products from the past years, most important is to determine whether or not the snow is going to glaze.
|
Holiday Classic
Wed, Jan 2, 2008
- By Mike Muha
Lucky I arrived at the Holiday Classic two hours before race time. I knew kick waxing was going to be problematic for this 9km race and the first Michigan Cup race of the season.
|
Fast Wax Tip
Wed, Jan 2, 2008
- By Dan Meyer
If you have one pair of skis, changing the base structure will be a regular occurrence as snow type, temperature and conditions change.
|
Fast Wax Tip
Mon, Dec 24, 2007
- By Dan Meyer
Artificial or man-made snow is a combination of snow, dirt and oil. Man-made snow is a hard particle of ice, not a hollow flake of snow. For this reason, wax recommendations will change slightly from those for natural snow.
|
Toko Tech Tip
Mon, Dec 17, 2007
- By Ian Harvey
When to use copper, horsehair, nlyon polishing, and nylon brushes.
|
Fast Wax Tip
Tue, Dec 11, 2007
- By Dan Meyer
For extra water replellency and long lasting glide in temperatures between 25 and 42F, use Flite 11 over your other race waxes. Video!
|
Toko Tech Tip
Sat, Dec 8, 2007
- By Ian Harvey
Carbon Klister Grip Spray Green is a very convenient and effective product. When conditions are between hard wax and klister, it is very effective to use a thin klister binder and cover it with hard wax.
|
Toko Tech Tip
Thu, Dec 6, 2007
- By Ian Harvey
To avoid breathing more smoke than necessary and to keep the base of the iron clean, remember to regularly wipe the base of the iron while using it.
|
Fast Wax Tip
Tue, Dec 4, 2007
- By Dan Meyer
Detailed instructions for glide waxing waxing race skis.
|
|
|
Strength, Balance, &
Core training for the Nordic Skier |
 |
 |
 |
|
Buy here! |

Help support the NordicSkiRacer web site! |
|
|
|
NordicSkiRacer says, "Join the AXCS today! Promote XC skiing & get great benefits
for yourself."

Recommended
|
|
|
|
 Over
25 Michigan cities & across the USA
|
|
|