Wax recommendations: Michigan Cup and Michigan HS Championships!

By Mike Muha — February 15, 2019 12:00am

Share this article

Waxing

Wax recommendations for the this weekend's races!

Friday, February 15, 2019

Michigan High School Championships - Pursuit Skate, Marquette\Ishpeming, MI

Saturday, February 16, 2019

Michigan High School Championships - Sprint and Pursuit Classic, Marquette\Ishpeming, MI

Meijer State Games Of Michigan - Forbush 8K/18K Freestyle, Forbush Corner, Frederic, MI

Good Solda Wax:
Base: a layer of Solda S30 powder. Scrape while still warm, don't brush.
Paraffin: Apply two layers of Solda Performance Green, scrape and brush each.

Better Solda Wax:
Base: a layer of Solda S30 powder. Scrape while it is still warm, don't brush.
Paraffin: A layer of Solda Performance Green. Then a layer of Solda F15 Violet. Scrape and brush

Best Solda Wax:
Base: a layer of Solda S30 powder. Scrape while it is still warm. Don't brush.
Paraffin: Apply two layers of Solda F40 Violet Special.
Powder: Apply Solda HP05. Then rub on a good thick layer of Solda Powerjet 2 on the front 2/3 of the ski. Rotor-Cork and brush this.

Sunday, February 17, 2019

Meijer State Games of Michigan / Hanson Hills Classic, Hanson Hills Recreation Area, Grayling, MI

Good Solda Wax:
Base: a layer of Solda S30 powder. Scrape while still warm, don't brush.
Paraffin: Apply two layers of Solda Performance Green, scrape and brush each.

Better Solda Wax:
Base: a layer of Solda S30 powder. Scrape while it is still warm, don't brush.
Paraffin: A layer of Solda Performance Green. Then a layer of Solda F15 Violet. Scrape and brush

Best Solda Wax:
Base: a layer of Solda S30 powder. Scrape while it is still warm. Don't brush.
Paraffin: Apply two layers of Solda F40 Violet Special.
Powder: Apply Solda HP05. Then rub on a good thick layer of Solda Powerjet 2 on the front 2/3 of the ski. Rotor-Cork and brush this .

Kick wax:
Binder: Apply Vauhti Super Base on a clean and sanded kick zone. The Vauhit is best stored in the freezer and applied to a warm ski. After rubbing the binder on in a fairly thin layer, iron it in and let it cool. When cool, cork it smooth with a synthetic cork.

Wax: Multiple layers of Rode Green might work well. That would be my first try at testing.

DYI Waxing